3D Metal Kits - USS Theodore Roosevelt CVN-71

Item Number
3DKit-033
No reviews yet Write a Review
$17.95

USS Theodore Roosevelt (CVN-71) is the fourth Nimitz-class, nuclear-powered, aircraft carrier in the United States Navy. She is named in honor of Theodore Roosevelt, the 26th President of the United States and a proponent of naval power. She is the fourth ship named in honor of Theodore Roosevelt, three bearing his full name and a fourth with just his last name. Another three U.S. Navy ships have "Roosevelt" in their names in honor of members of the Roosevelt family. This carrier's radio call sign is "Rough Rider", the nickname of President Roosevelt's volunteer cavalry unit during the Spanish–American War. She was launched in 1984, and saw her first action during Operation Desert Storm in 1991. Wikipedia

 

Ordered: 30 September 1980

Builder: Newport News Shipbuilding

Cost: $4.5 billion (2007 dollars)

Laid down: 31 October 1981

Launched: 27 October 1984

Commissioned: 25 October 1986

Homeport: San Diego

Class and type: Nimitz-class aircraft carrier

Displacement: 104,600 long tons (117,200 short tons)[2]

Length:        Overall: 1,092 feet (332.8 m)

                     Waterline: 1,040 feet (317.0 m)

Beam:           Overall: 252 feet (76.8 m)

                     Waterline: 134 feet (40.8 m)

Draft:            Maximum navigational: 37 feet (11.3 m)

                     Limit: 41 feet (12.5 m)

Propulsion:  2 × Westinghouse A4W nuclear reactors

                     4 × steam turbines driving 4 × shafts

                     260,000 shp (194 MW)

Speed:          30+ knots (56+ km/h; 35+ mph)

Range:          Unlimited distance; 20–25 years

Endurance:   Limited only by food and supplies

Complement: Ship's company: 3,200

                       Air wing: 2,480

 

Number Of Sheets: 2 Sheets

Difficulty: Expert

Assembled Size: 8"L x 1.75"W x 1.9"H (20.32 x 4.45 x 4.83 cm)

Ages 14+

 

Metal Earth kits are made from high quality steel sheets. Each model features amazing detail with parts cut from one or more 4” square steel sheets. Easy to follow instructions are included with each kit and NO GLUE OR SOLDER REQUIRED! Simply snip out the pieces and bend the tabs through corresponding connection points.