H&K P9S Stripped Pistol Frame

H&K P9S stripped pistol frames. These frames are from pistols that were torn down for parts. Frames are in overall great condition. 

The P9 is a roller-delayed pistol manufactured from a stamped steel main frame and a polymer trigger guard. The stamped steel slide contains machined internal parts including a polygonally rifled barrel. High-profile fixed sights are fitted with two red rectangles on the rear sight and a white stripe on the drift adjustable front blade sight. Vertical zeroing is accomplished by fitting front sights of a different height.

The P9S trigger operates as a traditional double action. There is a lever on the left side of the pistol grip to both decock a cocked hammer or to manually re-cock it for a single action first shot, a feature first observed on the Sauer 38H. A further function of the decocking lever is to release the slide stop. The hammer is concealed within the slide (also similar to the Sauer) with a protruding pin at the rear of the slide as a cocking indicator. The operating spring surrounds the barrel, allowing for a lower bore axis than pistols such as John Browning's M1911 that have the operating spring below the barrel. A manual firing-pin safety is located at the left rear of the slide; putting it in the down position locks the firing pin and flipping it up to level position unlocks it.

Pictures are stock photos and represents type and condition of frame you may receive.

BEFORE PLACING AN ORDER FOR A FIREARM, PLEASE CLICK HERE TO READ OUR FIREARMS ORDERING INFORMATION TO AVOID HAVING YOUR ORDER CANCELED