C96 Broomhandle Mauser Follower

Fits my M30 perfectly. It is slightly taller than the original magazine follower, which is what I wanted because the original was starting to catch at the top of the magazine well.

The Sarco part fits perfectly and solved a problem I was having with the follower getting stuck at the top of the magazine channel and preventing me from feeding in a new clip. The follower was coming up so high that the bottom was leaving the magazine channel and catching on some part of the lower. This was always an issue but got noticeably worse after the latest spring update. The Sarco part is about a 1/8" taller and thus the bottom never gets above the top of the magazine channel.
One thing to note is that the Sarco part does not have the slot for the top of the mag spring to slide into, so it just sits on top of the spring, but this has not been an issue.

item does not have all the features of the original but will make worn and rusty stickiness go away