Getting Low!!! And shipments are delayed for months because of the Virus. Stock up now on all major .45 components.
Put together your own .45 “Government” pistol with our Builder Kits. Several different kits available to best fit your needs. Our parts are standard M1911A1/ Pre-’70 Government type. Compare our prices and see how much you will save compared to the competition.
Buy 3 or more and save!
Builders Kit - All parts in the gun less frame and slide:
(1) Auto Frame Kit .45 Cal
(1) Auto Magazine, 7 round
(1) Slide Stop
(1) Barrel 5" .45 Cal
(1) Barrel Bushing
(1) Barrel Link
(1) Barrel Link Pin
(1) Extractor .45 Cal
(1) Firing Pin .45 Cal
(1) Firing Pin Spring .45 Cal
(1) Firing Pin Stop .45 Cal
(1) Recoil Spring .45 Cal
(1) Recoil Spring Guide
(1) Recoil Spring Plug
Note: All gun parts may require some fitting and technical knowledge for assembly. If you are not knowledgeable seek professional assistance.
ALL OF OUR PARTS KITS ARE IN HIGH DEMAND, AS WELL AS THE INDIVIDUAL PARTS INCLUDED IN THEM. WE TRY VERY HARD TO KEEP AN AMPLE STOCK OF ALL ITEMS, BUT DUE TO SUPPLY AND DEMAND, WE DO RUN OUT OF PARTS & HAVE TO WAIT FOR ITEMS TO COME IN TO US. PLEASE UNDERSTAND WE HAVE LITTLE CONTROL OVER HOW LONG IT TAKES FOR ITEMS TO BE DELIVERED TO US. BE AWARE WHEN ORDERING A KIT, IF WE ARE OUT OF SOMETHING IT MAY TAKE A WHILE FOR US TO GET IT TO YOU. WE WILL ALWAYS DO OUR BEST TO GET YOUR ORDER TO YOU AS QUICKLY AS POSSIBLE & WE TRULY APPRECIATE YOUR PATIENCE.
Nice kit, nice finish on all parts, didn't give 5 star just because the Grips are two different colors and one had some bad spots, but most people will use custom grips anyway, that's what I had planned on
I was really impressed with the quality of this kit. Definitely going to be getting another soon
So during a move some years ago my box marked 1911 parts went missing. Still sore about it because i always kept enough smalls on hand to put together at least 20 pistols.
Anyway i recently dug a Metro Arms frame and slide out of a box of stuff and thought id try this and finish an the cheap.
Grips were as pictured. Really garbage but as pictured so no complaints. Ordered new ones.
Grip screws i needed to replace. Looked like a cold blue finish.
Barrel hood was wide and needed fitting but that was good.
Safety plunger spring was wrong but i had another
Mainspring was wrong but i had another.
A little disappointed with the grip safety but it works.
Hammer and sear and sear spring all good.
Slide stop good
Thumb safety good.
Bushing loose but good
Extractor not GI but should do what its supposed to
Didn't use them but came with 2 narrow front sights and a GI rear
Mag catch needed fitting but is fine
Disconnector just fine
Grip screw bushings just fine
Magazine looks good
Mainspring housing arched with lanyard loop. Dont like it. Personal preference. Replaced.
So.. The kit was very complete.
Plan on new grips if you want anything nice. Make sure you know how to fit parts and stake grip screw bushings and plunger tubes. Also when your ordering your grips order a mainspring and plunger tube spring and maybe some barrel links just to be safe.
Will update when i get to the range.
All parts appear to be first class. I have not started the assembly yet though. It was a very good buy!