FN Semi-Auto Rifle Model 1949
| FN49031 | FN49, Auxiliary sear (semi-auto) | $8.50 |
| FN49030 | FN49, Auxiliary sear spring | N/A |
| FN49058 | FN49, Barrel w/front sight base, gas cylinder, bayonet lug, operating rod guide, (new), 8mm | $79.95 |
| FN49059 | FN49, Barrel w/muzzle bearing, front sight base, gas cylinder, bayonet lug, operating rod guide, (used, fair) .30-06 | $59.95 |
| FN49060 | FN49, Barrel w/muzzle bearing, front sight base, gas cylinder, bayonet lug, operating rod guide, (used, poor) .30-06 | $39.95 |
| FN49080 | FN49, Barrel 8x57mm, good bore, good rifling | N/A |
| FN49081 | FN49, Barrel 8x57mm, fair bore | $39.95 |
| FN49056 | FN49, Bolt (complete) .30-06 | $49.95 |
| FN49057 | FN49, Bolt (stripped) .30-06 | $29.75 |
| FN49006 | FN49, Bolt carrier catch | $7.20 |
| FN49003 | FN49, Bolt carrier catch spring | $1.50 |
| FN49002 | FN49, Bolt carrier catch stop | $4.50 |
| FN49035 | FN49, Bolt stop assembly | N/A |
| FN49027 | FN49, Buttplate (.30-06) | $13.75 |
| FN49026 | FN49, Buttplate screw | $1.50 |
| FN49029 | FN49, Buttswivel | $3.25 |
| FN49028 | FN49, Buttswivel screw | $1.50 |
| FN49044 | FN49, Center guard screw | $3.00 |
| FN49065 | FN49, Ejector 7mm/8mm | N/A |
| FN49014 | FN49, Extractor | $9.50 |
| FN49015 | FN49, Extractor spring | $5.20 |
| FN49055 | FN49, Firing pin (one piece) | $16.95 |
| FN49010 | FN49, Firing pin extension | $14.50 |
| FN49013 | FN49, Firing pin safety stop | $7.50 |
| FN49012 | FN49, Firing pin spring | $3.45 |
| FN49049 | FN49, Front guard screw | $3.00 |
| FN49022 | FN49, Front handguard | $19.95 |
| FN49024 | FN49, Front sight | $4.50 |
| FN49023 | FN49, Gas adjusting sleeve | $8.95 |
| FN49021 | FN49, Gas cylinder | $25.00 |
| FN49062 | FN49, Gas cylinder plug .30-06 | $9.25 |
| FN49061 | FN49, Gas cylinder plug 7mm/8mm | N/A |
| FN49048 | FN49, Guard screw stop screw | $1.75 |
| FN49067 | FN49, Hammer assembly (full-auto) | N/A |
| FN49066 | FN49, Hammer assembly (semi-auto) | $12.25 |
| FN49047 | FN49, Hammer pin | $1.50 |
| FN49037 | FN49, Inner hammer spring | N/A |
| FN49009 | FN49, Inner recoil spring | $7.50 |
| FN49007 | FN49, Inner recoil spring guide | $7.50 |
| FN49039 | FN49, Lower band | $8.50 |
| FN49038 | FN49, Lower band swivel | $4.25 |
| FN49054 | FN49, Magazine assembly .30-06 | $65.00 |
| FN49052 | FN49, Magazine box .30-06 | $50.00 |
| FN49082 | FN49, Magazine box 8mm | $75.00 |
| FN49045 | FN49, Magazine catch | $6.95 |
| FN49050 | FN49, Magazine catch pin | N/A |
| FN49051 | FN49, Magazine follower .30-06 | $10.00 |
| FN49025 | FN49, Muzzle cap | $8.50 |
| FN49036 | FN49, Outer hammer spring | N/A |
| FN49008 | FN49, Outer recoil spring | $7.50 |
| FN49019 | FN49, Piston | $19.95 |
| FN49018 | FN49, Piston spring | $8.50 |
| FN49042 | FN49, Rear guard screw | $3.00 |
| FN49020 | FN49, Rear handguard | $19.95 |
| FN49004 | FN49, Rear sight assembly | $19.50 |
| FN49005 | FN49, Rear sight spring | $2.75 |
| FN49016 | FN49, Receiver cover with bolt carrier, catch stop and recoil spring guide .30-06 | $37.50 |
| FN49017 | FN49, Receiver cover with recoil spring guild only .30-06 | $34.50 |
| FN49053 | FN49, Recoil spring assembly | $21.50 |
| FN49043 | FN49, Safety | $6.50 |
| FN49077 | FN49, Sniper Leather Lens Cover Set | N/A |
| FN49072 | FN49, Sniper Rifle Chest | N/A |
| FN49073 | $99.95 | |
| LE4060 | Complete Hardware Set for FN49 Sniper Chest (above) | $49.50 |
| FN49011 | FN49, Sliding dust cover | $7.95 |
| FN49068 | FN49, Stock .30-06, Good condition, will rework well (we did one) (not returnable) | $65.00 |
| FN49001 | FN49, Stock 30.06 Good condition, will rework well (we did one) - Complete with handguard set (not returnable) | $75.00 |
| FN49078 | FN49, Stock .30-06 and Handguard - Reworked in our shop | $125.00 |
| FN49041 | FN49, Stock end cap | $7.95 |
| FN49040 | FN49, Stock end cap screw | $2.30 |
| FN49032 | FN49, Trigger | $8.50 |
| FN49046 | FN49, Trigger pin | $1.50 |
| FN49034 | FN49, Trigger spring | N/A |
| FN49033 | FN49, Trigger spring plunger | $2.00 |
| FN49063 | FN49, Triggerguard (stripped) | N/A |
| FN49064 | FN49, Triggerguard assembly | N/A |
|
Disclaimers Website subject to errors and omissions. Prices & Descriptions subject to change without notice. When in doubt, check the most current issue of the Shotgun News. The current issue of Shotgun News will always be the governing price with the most up to date descriptions and information concerning our products. See Ordering Instructions for shipping & handling charges, minimum orders, and other important ordering information.
|
| SARCO Inc. PO Box 98, 323 Union Street,
Stirling NJ 07980 Voice (908) 647-3800 / Domestic Fax (908) 647-9413 / Int'l Fax (908) 647-3846 / E-mail info@sarcoinc.com |